Fundamentals of DRAM

View all eLearning Courses

PCI Express Courses
PCIe6 Update eLearning Course
PCIe Security eLearning Course
Comprehensive PCIe 5.0 eLearning Course
Advanced PCIe eLearning Course
Core PCIe eLearning Course
Fundamentals of PCI Express eLearning Course
PIPE 6.0 - PHY Interface for PCI Express and more
CXL Courses
CXL Fundamentals eLearning Course
Comprehensive CXL 2.0 eLearning Course
CXL 3.1 Update eLearning Course
USB Courses
USB4 Architecture eLearning Course
USB Type-C and Power Delivery eLearning Course
USB 3.2 Update
Comprehensive USB 3.1 eLearning Course
xHCI eLearning Course
x86 Architecture Courses
Intel x86 Processor and Platform Architecture eLearning Course
Thunderbolt 3 Fundamentals
x86 Architecture eLearning Course
ARM Courses
Fundamentals of ARM Architecture
ARMv8-M and v8.1-M eLearning Course
ARM 64-bit Architecture (ARM v8-A) eLearning Course
ARM v8-A Registers and Instruction Set eLearning Course
ARM v8-A Memory Management eLearning Course
ARM v8-A Exceptions and Interrupts eLearning Course
Comprehensive ARM Architecture eLearning Course
ARM v7 Registers and Instruction Set eLearning Course
ARM v7 Memory Management eLearning Course
ARM v7 Exceptions and Interrupts eLearning Course
Fundamentals of AMBA eLearning Course
ARM 32-bit Architecture (ARM v7) eLearning Course
ARM v8-A Porting and Software Optimization eLearning Course
ARM v8-A (64-bit) Pipelines eLearning Course
ARM MCU Architecture eLearning Course
ARM Cortex-M7 Processor eLearning Course
Fundamentals of ARMv8-A eLearning Course
Memory Courses
DRAM Class PRE-WORK
DRAM Class Supplementary Material
Modern DRAM (DDR5 / DDR4 / LPDDR5 / LPDDR4) eLearning Course
I3C Architecture eLearning Course
Fundamentals of DRAM
Storage Courses
SAS 3.0 Storage Technology eLearning Course
Advanced Host Controller Interface (AHCI) eLearning Course
NVM Express 1.4 eLearning Course
NVMe-oF eLearning Course
SATA 3.2 Technology eLearning Course
Universal Flash Storage (UFS) eLearning Course
Virtualization Courses
PC Virtualization eLearning Course
IO Virtualization for Intel Platforms eLearning Course
Firmware Courses
UEFI x64 Architecture eLearning Course



Fundamentals of DRAM

Instructor(s): John Swindle
Number of Modules: 23
Subscription Length: 90 days

Course Price
$595.00



Fundamentals of DRAM eLearning Course Info

Note: This course is a subset of the comprehensive course entitled Modern DRAM (DDR5 / DDR4 / LPDDR5 / LPDDR4).
If you purchase this fundamentals course and then want to upgrade to the comprehensive course, you will only have to pay the difference for the upgrade.

What's Included?

DRAM eLearning modules
(unlimited access for 90 days)
PDF of Course Slides
(yours to keep, does not expire)

Benefits of eLearning:

  • Cost Effective - Get the same information delivered in a live MindShare class at a fraction of the cost
  • Available 24/7 - MindShare eLearning courses are available when and where you need them
  • Learn at Your Pace - MindShare eLearning courses are self-paced, so you can proceed when you're ready
  • Access to the Instructor - Ask questions to the MindShare Instructor that taught the course

You Will Learn:

  • Where JEDEC expects DRAM to appear in a system
  • How a DRAM cell is addressed by the controller
  • Difference between Banks, Bank Groups and Ranks
  • Why the DRAM controller is so complicated
  • Activation, Precharge and Refresh
  • DDR4 pin definitions
  • DDR4 bank state diagram
  • DDR4 timing waveforms
  • Prefetch Width
  • Types of DIMMS
  • Fly-By Routing
  • PC and LP DRAM device architectures and features including DDR5 and LPDDR5

Who Should View?

This course is hardware-centric and describes the basics of DRAM devices and controllers. It is suitable for hardware engineers and software/firmware engineers will also benefit. The course is ideal for DRAM controller designers, chipset designers, system board-level design and validation engineers. This course introduces current DRAM technologies, concentrating on DDR4 as a baseline to teach concepts that are common to all DRAMs.

Course Outline:

  • Module 1: Introduction and Outline
    - Intro to the course, outline and objectives
  • Module 2: System Architecture
    - Shows where DRAM fits in traditional and non-traditional computer systems
  • Module 3: Intro to DRAM
    - Discusses the history of DRAM and the pros / cons of DRAM vs SRAM, also describes DRAM cell architecture
  • Modules 4a-4e: DRAM Device Architecture
    - Shows how the evolution of DRAM arrays and banks which leads into addressing data within a DRAM array; Defines banks, ranks and channels; Walks through the evolution of DRAM architecture (SDR, DDR1, DDR2, DDR3, DDR4, DDR4 and then on to LPDDR3, LPDDR4 and LPDDR5)
  • Module 5: Packaging and HBM
    - Introduces different package types (BGA, PoP, 3D Stacking, Die Stacking, TSI and Hybrid Memory Cube); Provides a brief discussion of High Bandwidth Memory (HBM)
  • Modules 6a-6b: DRAM Controller Basics and Addresses
    - Discusses required blocks of a DRAM controller (address and control mux, refresh timer, PLL, timing generator, control registers, read and write buffer and IO buffer pads); Describes the translation necessary from system address to DRAM addressing, including symmetric vs asymmetric schemes and NUMA
  • Modules 7a-7b: DDR4 Device and DIMM Pin Descriptions
    - Provides a description of the DDR4 device and DIMM pin groups as well as discusses changes in the JEDEC documentation styles to help avoid confusion when reading the standards
  • Modules 8a-8b: Intro to DIMMs (Dual Inline Memory Modules)
    - Walks through the evolution of DIMMs from SIMMs to the various types of DIMMs (UDIMMs, RDIMMs, LRDIMMs, NVDIMMs, etc.)
  • Module 9: Signal Routing
    - Discusses basic signal routing rules and then walks through detailed examples of DDR4 fly-by routing for reads and writes
  • Module 10a-10e: DDR4 - Bank State Machines, Commands and Waveforms
    - Shows a detailed view of the DDR4 Bank States and discusses numerous state transitions, their motivations, behaviors, requirements, etc.; Contains a detailed table of DDR4 commands with descriptions; Walks through numerous DDR4 timing diagrams of various commands and provides insights for the motivations of behaviors and requirements; Also discusses burst orientations, types, lengths and order; Also discusses additive latency, NOP and power down
  • Module 11a-11b: Refresh
    - Provides a description of the different types of refresh and its history; Discusses important refresh timing parameters like Retention, Refresh Interval and Cycle Time; Describes the refresh command
Course Modules
ModuleLength
Module 1: Fundamentals of DRAM31 minutes
Module 2: System Architecture33 minutes
Module 3: Intro to DRAM33 minutes
Module 4a: DRAM Device Architecture37 minutes
Module 4b: DRAM Device Architecture27 minutes
Module 4c: DRAM Device Architecture32 minutes
Module 4d: DRAM Device Architecture38 minutes
Module 4e: DRAM Device Architecture37 minutes
Module 5: Packaging and HBM32 minutes
Module 6a: DRAM Controller Basics and Addresses22 minutes
Module 6b: DRAM Controller Basics and Addresses28 minutes
Module 7a: DDR4 Device and DIMM Pin Descriptions39 minutes
Module 7b: DDR4 Device and DIMM Pin Descriptions33 minutes
Module 8a: Intro to DIMMs (Dual Inline Memory Modules)30 minutes
Module 8b: Intro to DIMMs (Dual Inline Memory Modules)29 minutes
Module 9: Signal Routing36 minutes
Module 10a: DDR4 - Bank State Machines, Commands and Waveforms33 minutes
Module 10b: DDR4 - Bank State Machines, Commands and Waveforms19 minutes
Module 10c: DDR4 - Bank State Machines, Commands and Waveforms24 minutes
Module 10d: DDR4 - Bank State Machines, Commands and Waveforms44 minutes
Module 10e: DDR4 - Bank State Machines, Commands and Waveforms23 minutes
Module 11a: Refresh36 minutes
Module 11b: Refresh with Fundamentals of DRAM End Bump37 minutes